Service Manual

CHASSIS

3-34 Toro Z Master G3 3000/5000/6000 Series Service Manual

Park Brake Cable Replacement (2012

& Later)

Left Park Brake Cable Removal (2012 &

Later)

1. Raise the rear end of the unit and install jack stands

under the tie down loop on the frame. Remove the

RH and LH wheels from the unit (Fig. 122).

Fig. 122 DSCN-4311a

4. Hold the threaded rod end with a tool, and with a

socket wrench remove the lock nut and washer from

the end of the cable (Fig. 124). Continue to remove

the washer and spring.

Fig. 124 DSCN-4315a

2. Disengage the park brake lever.

3. Remove the e-ring, washer, and brake pin from the

L-Bracket (Fig. 123).

Fig. 123 DSCN-4314a

5. Remove the e-ring from the groove in the cable end,

and the cable anchor located on the transmission

(Fig. 125).

Fig. 125 DSCN-4318a