Service Manual

CHASSIS

3-41Toro Z Master G3 3000/5000/6000 Series Service Manual

Right Park Brake Cable Removal (2012 &

Later)

1. Raise the rear end of the unit and install jack stands

under the tie down loop on the frame. Remove the

RH and LH wheels from the unit (Fig. 148).

Fig. 148 DSCN-4311a

2. Disengage the park brake lever.

3. Remove the e-ring, washer, and brake pin from the

L-Bracket (Fig. 149).

Fig. 149 DSCN-4364a

Fig. 150 DSCN-4366a

4. Hold the end of the threaded rod with a tool and with

a socket wrench remove the lock nut and washer

from the end of the cable (Fig. 150). Remove the

washer, spring and the L-Bracket.

5. Remove the e-ring from the groove in the cable end

and cable anchor located on the transmission (Fig.

151).

Fig. 151 DSCN-4368