Service Manual

CHASSIS

3-27Toro Z Master G3 3000/5000/6000 Series Service Manual

Right Park Brake Cable Removal (2011 &

Prior)

1. Raise the rear end of the unit and install jack stands

under the tie down loops on the frame. Remove the

RH and LH wheels from the unit (Fig. 098).

Fig. 098 PICT-8962

2. Disengage the park brake lever.

3. Remove the two nuts located on the end of the park

brake cable (Fig. 099).

Fig. 099 PICT-9075

Fig. 100 PICT-9083a

5. Slide the brake cable out of the cable anchor and out

towards the rear of the unit (Fig. 101).

Fig. 101 PICT-9084a

4. With needle nose pliers, squeeze the tabs on the

brake cable and pull brake cable out of the slot in the

cable anchor (Fig. 100).