Operator's Manual

Figure83
1.Flangednut2.Jamnut
HydraulicSystem
Maintenance
ServicingtheHydraulic
System
HydraulicOilType:Toro
®
HYPR-OIL
™
500hydraulicoil
orMobil
®
115W-50.
Important:Useoilspecied.Otheruidscouldcause
systemdamage.
EachHydraulicSystemOilCapacity:1.5L(1.59USqt)
persidewithlterchange
CheckingtheHydraulicOil
ServiceInterval:Every50hours—Checkthehydraulicoil
level.
1.Positionthemachineonalevelsurface.
2.DisengagethePTO,movethemotion-controlleversto
theneutral-lockedposition,andsettheparkingbrake.
3.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
4.Allowtheengineandhydraulicsystemtocoolfor10
minutes.
Note:Theoillevelonthedipstickwillbeincorrectif
theoilischeckedwhenthemachineishot.
5.Movetheseatforward.
6.Cleantheareaaroundthedipsticksofthehydraulic
systemreservoirs(Figure84).
7.Removeonedipstickfromthehydraulicreservoir
(Figure84).
8.Wipethedipstickoffandthreadthedipstickintothe
reservoir.
9.Removethedipstickandlookattheend(Figure84).
Note:Iftheoillevelisattheaddmark,slowlypour
onlyenoughoilintothehydraulicreservoirtoraisethe
leveltothefullorHline.
Important:Donotoverllthehydraulicunits
withoilasdamagemayoccur.Donotrunthe
machinewiththeoilbelowtheaddmark.
10.Installthedipstick.
11.Repeatprocedurefortheoppositedipstick.
55