Operator's Manual

1
g017029
Figure91
1.Boltsatthebottomoftheheight-of-cutplate
13.Ifthedeckistoolow,tightenthesinglepoint
adjustmentboltbyrotatingitclockwise.Ifthedeckis
toohigh,loosenthesinglepointadjustmentboltby
rotatingitcounterclockwise(Figure92).
Note:Loosenortightenthesinglepointadjustment
boltenoughtomovetheheight-of-cutplatemounting
boltsatleast1/3thelengthoftheavailabletravel
intheirslots.Thiswillregainsomeupanddown
adjustmentoneachofthefourdecklinks.
g017036
Figure92
1.Singlepointadjustmentbolt
14.Tightenthetwoboltsatthebottomoftheheightofcut
plate(Figure91).Torqueto27-33ft-lb(37-45N-m).
Note:Inmostconditions,thebackbladetipshould
beadjusted1/4inch(6.4mm)higherthanthefront.
15.Onbothsidesofthedeck,measurefromthelevel
surfacetothebacktipoftheblade(PostionB).
Themeasurementshouldread31/4inches(8.3cm)
(
Figure89).
16.Fine-tunetheadjustmentnutonthefrontdecklift
assemblybyturningit(Figure90).
Toincreasetheheight,turntheadjustmentnut
clockwise;todecrease,turncounterclockwise.
17.Measureuntilallfoursidesarethecorrectheight.
Tightenallthejamnutsonthedeckliftarmassemblies.
18.Lowerdischargechute.
56