Service Manual

SPECIFICATIONS
2-8 Toro Z Master G3 3000/5000/6000 Series Service Manual
2
G3 3000/5000/6000 Series Specications cont.
Fuel System:
Fuel Tank Capacity 8 Gallon (US) (26.5 L) 12 Gallon (US) (45.4 L) 43.5 lb Propane (19.7 kg)
Fuel Gauge Located on top of tank. Located on tank
Fuel Delivery System Fuel pump Vapor draw
Traction Drives:
Hydraulic Drive
System
Unitized Pump & Motor
Pump 12cc No Fans 12cc w/Check Valve 12cc w/Shock Valve 16cc w/Shock Valve
Motor 14.6 cir 14.6 cir 14.6 cir 17.1 cir
Hydraulic Fluid Toro Hypr-Oil (500 hr service) or Mobil 1 15w50 Motor Oil (250 hr service)
Hydraulic Fluid
Capacity
52 oz. (1.5 liters) per side w/ lter change
Ground Speed 0 to 8 mph fwd 0 to 10 mph fwd 0 to 10 mph fwd 0 to 12 mph fwd
Release Valves External lever on each unit. Allow unit to be moved without engine running
Pump drive Belt tension via spring loaded idler
Mowing Decks: 48” 52” 60” 72”
Cutting Deck Turbo Force Turbo Force Turbo Force Turbo Force
Cutting Height 1.0” to 5.5” (25.4mm - 139.7mm) in .25” (6.3mm) increments
Blade Tip Speed 18500 + ft/min 18500 + ft/min 18500 + ft/min 18500 + ft/min
Spindle
Standard Greasable
Ball Bearing
Standard Greasable
Ball Bearing
Standard Greasable
Ball Bearing
Tapered Roller or
Greasable Ball
Bearing
Conguration Tools Adjust or Hand Adjust Bafe
Clutch Models with 29 hp and under utilize a 200 ft-lb clutch.
Models above 29 hp utilize a 250 ft-lb clutch.
PTO Idler Spring-loaded idler system
Construction 7 gauge (.179”/ 4.5mm) Steel Welded Construction
Blades 16.5” long, .250”
thick, 2.5” wide, heat
treated steel blades,
qty 3
18.0” long, .250”
thick, 2.5” wide, heat
treated steel blades,
qty 3
20.5” long, .250”
thick, 2.5” wide, heat
treated steel blades,
qty 3
24.5” long, .250”
thick, 2.5” wide, heat
treated steel blades,
qty 3