Service Manual

MOWER DECKS
6-11Toro Z Master G3 3000/5000/6000 Series Service Manual
6
13. Using a hammer and a driver with a square edge,
drive both the top and bottom bearing races out of
the spindle housing (Fig. 414).
12. Remove the bearing from the bottom of the spindle
(Fig. 413).
Fig. 411 DSCN-2677a
11. Turn the spindle housing over and remove the oil
seal from the bottom of the spindle housing (Fig.
412). Note the orientation of the lower oil seal. The
open end of the seal faces outwards to help relieve
pressure from over-greasing the spindle assembly.
Fig. 412 DSCN-2679a
Fig. 413 DSCN-2680a
Fig. 414 DSCN-2681a
10. Remove the spacer (Fig. 411).