Service Manual

MOWER DECKS
6-3Toro Z Master G3 3000/5000/6000 Series Service Manual
6
4. Install the RH and LH belt covers (Fig. 392).
Fig. 392 DSCN-0064a
Mower Deck Replacement
Mower Deck Removal
Note: Before servicing or removing the mower deck,
the spring loaded deck arms must be locked
out.
WARNING
Deck lift-arm assemblies have stored energy.
Removing the deck with out releasing the stored
energy can cause serious injury or death.
Do not attempt to disassemble the deck from the
front frame without locking out the stored energy.
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Remove height adjustment pin and lower the deck to
the ground.
3. Place the height adjustment pin in the 3” (7.6cm)
cutting height position. This locks the deck lift arms
in the lower position when the deck is removed and
the stored energy in the deck spring is released.
4. Remove the RH and LH belt covers (Fig. 393).
Fig. 393 DSCN-0072