Service Manual

MOWER DECK

6-9

Toro TITAN 2009-2013 Service Manual

Mower Deck Replacement

Mower Deck Removal - 48 and 54 Inch Deck

1. Park the machine on a level surface and disengage

PTO switch.

2. Move the motion control levers outward to the

neutral position and engage parking brake.

3. Stop the engine, remove the key, and wait for all

moving parts to stop before leaving the operating

position.

4. Lower the mower to the 3 inch (76mm) height-of-cut

position.

5. Remove the PTO belt tensioner spring and remove

the PTO belt from the engine pulley.

6. Lower the mower to the lowest height-of-cut.

7. Move the spring loaded J-hooks out of the slot in the

rear hanger brackets on both sides of the deck (Fig.

102).

8. Remove the hardware from the front deck hangers

on both sides of the deck (Fig. 103).

Fig. 102 g. 70 G010311

Fig. 103 g. 71 G010304

9. Carefully lift the deck off the rear hanger bolts and

lower the front of the mower deck to the ground.

10. Raise the height-of-cut to the transport position.

11. Slide the mower out from underneath the machine.

A. Deck hanger E. Rear hanger bolts

B. Hairpin F. J-hook

C. Washer G. Rear deck hanger

D. Welded post on deck bracket