Operator's Manual

InstallingtheBlades
1.Installthebladeontothespindleshaft(Figure102).
Important:Thecurvedpartoftheblademustbe
pointingupwardtowardtheinsideofthemowerto
ensurepropercutting.
2.Installthespringdiskandthebladebolt.Thespring
diskconemustbeinstalledtowardthebolthead
(Figure102).Torquethebladeboltto115to150N-m
(85to110ft-lb).
Figure102
1.Sailareaofblade
4.Bladebolt
2.Blade
5.Conetowardsbolthead
3.Curvedwasher
RemovingtheMowerDeck
Beforeservicingorremovingthemowerdeck,the
spring-loadeddeckarmsmustbelockedout.
WARNING
Deckliftarmassemblieshavestoredenergy.
Removingthedeckwithoutreleasingthestored
energycancauseseriousinjuryordeath.
Donotattempttodisassemblethedeckfromthe
frontframewithoutlockingoutthestoredenergy.
1.Stoptheengine,waitforallmovingpartstostop,and
removethekey.Engagetheparkingbrake.
2.Removetheheight-adjustmentpinandlowerthedeck
totheground.
3.Placetheheight-adjustmentpininthe7.6cm(3inch)
cutting-heightlocation.
Note:Thislocksthedeckliftarmsinthelowest
positionwhenthedeckisremovedandthestored
energyinthedeckspringisreleased.
4.Removethebeltcovers.
5.Liftuptheoorpanandinsertaratchetintothesquare
holeinthedeckidler(Figure103).
6.Rotatethedeckidlerclockwiseandremovethemower
belt(Figure103).
62