Service Manual

CHASSIS

3-32 Toro Z Master G3 3000/5000/6000 Series Service Manual

Adjusting the Parking Brake

2. Ensure the parking brake is disengaged.

Note: The left side brake is being adjusted in the

following steps; the right side adjustment is

performed the same way.

1. Open the push valve (vertical position) on the hydro

unit that you are replacing the brake cable on (Fig.

117).

Fig. 117 PICT-8677a

4. While holding the lever, use the other hand or ngers

to pull the cable threaded end tight through the

swivel. Spin the standard nut against the swivel (Fig.

119).

Fig. 119 PICT-8680a

3. Using hands and ngers only, push the caliper lever

arm forward to engage the brake pads on the wheel

hub until the lever stops (Fig. 118).

Fig. 118 PICT-8679a

A. Standard nut B. Lock nut

A B