Setup Instructions

3
SettinguptheRollover
ProtectionSystem(ROPS)Bar
NoPartsRequired
Procedure
1.Removethebolts(1/2x3inches),washers,andnuts
fromthemiddleholeontheROPSplate(Figure3).
Figure3
Leftsideshown;repeatontherightside
1.Washer3.Middlehole
2.Bolt(1/2x3inches)
4.Nut
2.RotatetheROPStotheuprightposition.
3.Installthebolts(1/2x3inches),washers,andnuts
removedpreviouslyintothemiddlehole(Figure3).
4.Removethebolts(1/2x3inches),washers,andnuts
fromthefourthholeintheROPSplate(Figure4).
Figure4
Leftsideshown;repeatontherightside
1.Washer3.Fourthhole
2.Bolt(1/2x3inches)
4.Nut
5.Installtheremovedbolts(1/2x3inches),washers,and
nutsintothelowestholeintheROPSplate(Figure5).
Figure5
Leftsideshown;repeatontherightside
1.Washer3.Lowesthole
2.Bolt(1/2x3inches)
4.Nut
6.Torqueallofthefastenerstoapproximately45N∙m
(33ft-lb).
3