Service Manual

MOWER DECK
6-11
Toro TITAN 2009-2013 Service Manual
6
7. Remove the hardware from the front and rear deck
hangers on both sides of the deck (Fig. 106).
Mower Deck Installation - 60 Inch Deck
1. Slide the mower under the machine.
2. Lower the height-of-cut lever to the lowest position.
Place the height-of-cut pin in the lock position for
lowest height-of-cut.
3. Lift the rear of the mower deck and attach the
rear support on the mower deck to the rear deck
hangers. Secure them with a washer and hairpin.
4. Attach the front support on the mower deck to the
front deck hangers and secure them with a washer
and hairpin (Fig. 106).
5. Install the long, link bar through the frame hanger
and deck. Secure the link bar with the hairpin and
washers removed previously (Fig. 107).
Fig. 106 g. 73 G010305
A. Deck hanger C. Washer
B. Hairpin D. Welded post on deck
A
B
D
D
C
C
B
A
8. Raise the height-of-cut to the transport position.
9. Slide the mower out from underneath the machine.
Fig. 107 g. 72 G010309
A. Hairpin C. Washer
B. Link bar
A
B
C
6. Properly route and install the PTO belt, then install
tensioner spring.