Service Manual
ELECTRICAL
7-3
Toro TITAN 2014 Service Manual
7
Continuity Testing
Terminals viewed from the back of the switch.
With the Switch “ON” (Button pulled OUT):
- Pin 2 and 5 should have continuity (closed - circled below)
- Pin 1 and 4 should have continuity (closed - circled below)
- Pin 1 and 7 should not have continuity (open)
- Pin 2 and 8 should not have continutiy (open)
(Fig. 111 and Fig. 112)
Fig. 111 PICT-1005 Fig. 112 PICT-2004
With the Switch “OFF” (Button pushed IN):
- Pin 1 and 7 should have continuity (closed - circled below)
- Pin 2 and 8 should have continuity (closed - circled below)
- Pin 2 and 5 should not have continuity (open)
- Pin 1 and 4 should not have continuity (open)
(Fig. 113 and Fig. 114)
Fig. 113 PICT-1006 Fig. 114 PICT-2003
3 9
2
5
8
1
4
7
3 9
2
5
8
1
4
7
Note: Switchpins3and9arenotused.