Service Manual

MOWER DECK

6-10

Toro TITAN 2009-2013 Service Manual

Mower Deck Removal - 60 Inch Deck

1. Park the machine on a level surface and disengage

PTO switch.

2. Move the motion control levers outward to the

neutral position and engage parking brake.

3. Stop the engine, remove the key, and wait for all

moving parts to stop before leaving the operating

position.

4. Lower the mower to the 3 inch (76mm) height-of-cut

position.

5. Remove the PTO belt tensioner spring and remove

the PTO belt from the engine pulley.

6. Remove the hairpin and washer securing the long,

link bar to the frame and deck; remove the link bar

(Fig. 105).

Fig. 105 g. 72 G010309

Mower Deck Installation - 48 and 54 Inch

Deck

1. Slide the deck under the machine.

2. Lower the height-of-cut lever to the lowest position.

Place the height-of-cut pin in the lock position for

lowest height-of-cut.

3. Lift the rear of the mower deck and guide the hanger

brackets over the rear hanger bolts.

4. Attach the front support on the mower deck to the

front deck hangers and secure them with a washer

and hairpin (Fig. 104).

Fig. 104 g. 71 G010304

A. Deck hanger E. Rear hanger bolts

B. Hairpin F. J-hook

C. Washer G. Rear deck hanger

D. Welded post on deck bracket

A. Hairpin C. Washer

B. Link bar

5. Properly route and install the PTO belt and tensioner

spring.