Service Manual

CHASSIS

3-11

Toro TITAN 2009-2013 Service Manual

7. Remove the (2) control covers (E) (Fig. 020). 10. Remove the parking brake pin and washer (G).

Remove the parking brake link from the handle stud

(Fig. 022).

Fig. 020 PICT-2010

8. Make note of wire harness routing. Disconnect the

RH and LH neutral switches and the parking brake

switch. Open the loom routing clip and completely

remove harness from the Control Box.

9. Remove the motion control rod clips and pins (F)

(Fig. 021).

Fig. 021 PICT-2075

Fig. 022 PICT-2076

Fig. 023 PICT-2084

11. Remove the (4) fasteners (H) that secure the Control

Box to the frame (Fig. 023).

12. Remove the (2) nuts and (2) carriage bolts (I) that

secure the Control Box to the frame (Fig. 023).