Service Manual

HYDROSTATIC DRIVE SYSTEM

7-12007 - 2008 Titan Z Service Manual

Hydro Drive Belt Replacement

Hydro Drive Belt Removal

1. Disconnect the negative battery cable from the

battery.

2. Raise and support the rear end of the machine with

a lift or jack stands.

3. Locate the idler arm assembly on the mower deck.

Pull the arm toward the rear of the machine and

remove the mower deck belt from the idler pulley

(Fig. 361).

4. Remove the mower deck belt from around the

electric PTO clutch. Push the excess deck belt

forward towards the mower deck (Fig. 362).

Fig. 361 IMG-0432a

Fig. 362 IMG-0372

5. Using a spring tool (Toro part number 92-5771),

release the tension from the hydro drive belt idler

arm and remove the hydro drive belt from the idler

arm pulley (Fig. 363).

Fig. 363 IMG-0435