Service Manual

HYDROSTATIC DRIVE SYSTEM
7-372007 - 2008 Titan Z Service Manual
7
21. Check the routing of the hydro drive belt. Refer to
the hydro drive belt routing decal (Fig. 489).
19. Route the hydro drive belt around the engine drive
pulley (Fig. 487).
20. Using a spring tool (Toro part number 92-5771),
release the tension on the hydro drive belt idler arm.
Route the belt around the idler pulley (Fig. 488).
Fig. 488 IMG-0435
Fig. 487 IMG-0439a
Fig. 489 109-6014
22. Route the mower deck drive belt around the electric
PTO clutch pulley (Fig. 490).
Fig. 490 IMG-0372