Service Manual
CHASSIS
3-492007 - 2008 Titan Z Service Manual
3
4. Remove the 4 carriage bolts, strut spacers and nuts
that secure the four deck hangers to the front and
rear shaft assemblies (Fig. 180).
3. Place blocks under the mower deck for support. Pull
the transport release handle and lower the mower
deck so that it is resting on the blocks (Fig. 179).
Fig. 179 IMG-0347
Fig. 180 IMG-0348
5. Remove the external retaining ring, washer, and
clevis pin securing the front shaft assembly to the
height-of-cut assembly (Fig. 181).
Fig. 181 IMG-0350a
6. Remove the external retaining ring, washer, and
clevis pin securing the rear shaft assembly to the
height-of-cut assembly (Fig. 182).
1RWH 7KHULJKWVLGHIHQGHUZDVUHPRYHGIRUSKRWR
FODULW\
Fig. 182 IMG-0351