Service Manual

CHASSIS

3-252007 - 2008 Titan Z Service Manual

21. Remove the wire harness plug from the right side

neutral switch (Fig. 088).

23. Remove the wires from the four solenoid terminals

(Fig. 090).

20. Locate the clamp that the throttle and choke cables

are routed through on the right side of the seat box.

Remove the clamp from the seat box (Fig. 087).

22. Remove the wire harness plug from the left side

neutral switch (Fig. 089).

Fig. 087 IMG-0240

Fig. 088 IMG-0245

Fig. 089 IMG-0247

Fig. 090 IMG-0251

A. Kill Relay/PTO Clutch (Green/Green)

B. Ignition Switch (Blue)

C. Starter (Red)

D. Battery and Fuse block (Large red and small red)