Service Manual

HYDROSTATIC DRIVE SYSTEM

7-16 2007 - 2008 Titan Z Service Manual

Brake Linkage & Brake Handle

Assembly Replacement

Brake Linkage & Brake Handle Assembly

Removal

1. Raise the seat.

2. Remove the negative and then the positive battery

cable from the battery.

3. Loosen the two wing nuts on the battery hold down

bolts and remove the battery from the machine (Fig.

410).

Fig. 410 IMG-0456

10. Install the positive and then the negative battery

cable to the battery.

11. Start the machine and allow it warm up. Check

the forward, reverse and neutral operation. If the

machine needs neutral adjustment, refer to “Neutral

Adjustment” on page 7-39.

9. Position the battery into the machine. Install the

battery hold down bracket to secure (Fig. 409).

Fig. 409 IMG-0456