Service Manual

HYDROSTATIC DRIVE SYSTEM

7-152007 - 2008 Titan Z Service Manual

6. Plug the wire harness plug onto the left neutral

switch (Fig. 407).

5. Install the motion control damper screw through the

left hand motion control pivot assembly. Install a nut

to secure (Fig. 406).

Fig. 406 IMG-0480a

Fig. 407 IMG-0522a

7. Install two screws and washers retaining the left

hand lever grip assembly to the lever mount post

(Fig. 408).

Fig. 408 IMG-0523a

8. Left Hand Motion Control Pivot: Install the left hand

fender and fuel tank. Refer to “Left Hand Fender and

Fuel Tank Installation” on page 3-10

Right Hand Motion Control Pivot: Install the right

hand fender. Refer to “Right Hand Fender Install-

ation” on page 3-17.