Service Manual

CHASSIS
3-44 2007 - 2008 Titan Z Service Manual
3
42. Install a clamp around the throttle and choke cables
and install the clamp through the right, rear side of
the seat box assembly (Fig. 162).
43. Position the seat delay module on the inside of the
seat box to the rear, right side. Install two bolts,
washers, and nuts to secure (Fig. 163).
45. Pull the control panel wire harness through the hole
on the right side of the seat box assembly (Fig. 165).
44. Install a clamp around the wire harness on the inside
of the seat box. Install the clamp through the right
side of the seat box assembly (Fig. 164).
Fig. 162 IMG-0240
Fig. 163 IMG-0239
Fig. 164 IMG-0238
Fig. 165 IMG-0237