Service Manual

HYDROSTATIC DRIVE SYSTEM

7-272007 - 2008 Titan Z Service Manual

23. Install the positive and then the negative battery

cable to the battery.

24. Lower the seat.

25. Start the machine and check the operation of the

park brake assembly.

21. Install the left hand fender and fuel tank. Refer to

Left Hand Fender and Fuel Tank Installation on page

3-10.

22. Position the battery in the machine. Install the

battery hold down to secure (Fig. 450).

Fig. 450 IMG-0456

Transaxle Replacement

Transaxle Removal

Note: These instructions show the removal and

Installation of the left side transaxle. The

same procedure is used to remove and install

the right side transaxle.

1. Raise the seat.

2. Disconnect the negative battery cable from the

battery.

3. Raise the rear of the machine and support it with

jack stands under the rear of the frame.

4. Remove the left side tire and wheel assembly (Fig.

451).

Fig. 451 IMG-0545