Operator's Manual
Table Of Contents
- NO TITLE
- NO TITLE
- NO TITLE
- Adding Fuel
- Checking the Engine-Oil Level
- Breaking in a New Machine
- Think Safety First
- Understanding the Safety-Interlock System
- Testing the Safety-Interlock System
- Starting the Engine
- Operating the Blades
- Stopping the Engine
- Driving the Machine
- Stopping the Machine
- Adjusting the Height of Cut
- Positioning the Seat
- Adjusting the Anti-Scalp Rollers
- Adjusting the Motion-Control Levers
- Pushing the Machine by Hand
- Grass Deflector
- Transporting the Machine
- Loading the Machine
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
Premaintenance
Procedures
RaisingtheSeat
Makesurethatthemotion-controlleversarelockedinthe
PARKposition,andlifttheseatforward.
Thefollowingcomponentscanbeaccessedbyraisingtheseat:
•Serialplate
•Servicedecal
•Seat-adjustmentbolts
•Fuellter
•Batteryandbatterycables
Lubrication
GreasingtheBearings
ServiceInterval:Every25hours—Greasealllubrication
points.
GreaseType:No.2lithiumgrease
1.Parkthemachineonalevelsurface,anddisengagethe
blade-controlswitch.
2.Movethemotion-controlleversoutwardtothePARK
position,shutofftheengine,removethekey,and
waitforallmovingpartstostopbeforeleavingthe
operatingposition.
3.Cleanthegreasettings(Figure26andFigure27)with
arag.
Note:Makesuretoscrapeanypaintoffthefrontof
thetting(s).
1
G014522
Figure26
1.Frontcastertire
Figure27
Locatedontheseat-panunderside
1.Readtheinstructions
beforeservicingor
performingmaintenance
3.Greaseevery25operating
hours
2.Checkthetirepressure
every25operatinghours
4.Engine
4.Connectagreaseguntoeachttingandpumpgrease
intothettingsuntilgreasebeginstooozeoutofthe
bearings(Figure26andFigure27).
27