Service Manual

MotionControlActuatorInstallation
1.Installthemotioncontrolactuatorontothemachine.
2.Connecttheswitchtotheconnector.Installthemotioncontrolneutralswitch
intothesteeringcontrolboxbydepressingthetabsoneithersideofthe
switch.
3.InstallthetopT-30screwand7/16inchnutsecuringthedampertothe
chassisandmotioncontrolactuator.Torquescrewandnutto11N•m(100
in-lb).
4.Installthe2(9/16inch)boltspermotioncontrolarm.T orqueboltto40.5–44.5
N•m(30–33ft-lb).
5.Installthecubbiebyliftingthefrontofeachpodtomaneuverthecubbie
ontothechassis.
6.Movethesmartspeedselectortothetrim/turtleposition.
7.Installthe2screws(T-20)securingthecubbietothechassis.T orquescrews
to11N•m(100in-lb).
8.Installthe2(T-30)frontpodmountingscrews.Torquethescrewsto11N•
m(100in-lb).
9.Installthefueltanktothechassis.Installthe2strapfastenerstothebottom
ofthefueltank.
g301705
Figure160
10.Uncapthehoses.Installthefuelhoseandfuelventhosetothefueltank
ttings.Installthespringclampssecuringthefuelhoseandthefuelvent
hose.
Note:Thefueltanklabelsbothventandfuelportsandlineorientation.
Chassis:ServiceandRepairs
Page5–70
TIMECUTTER®ServiceManual
3433-938RevA