Service Manual

MOWER DECK

6-23

Toro Timecutter SS/MX/ZS Service Manual

4� Carefully rotate the blade so that it is side-to-side

(Fig� 120)�

7� Move to the left side of the machine� Remove the

side carriage bolt (E) and locking nut (D) from the

xedposition(C).Installitintotherearslotted

position (B) (Fig� 121)� Leave the lock nut slightly

loose�

Fig. 120 g.48G014630

A� Blade side-to-side D� Measure from blade tip

B� Sail area of blade to level surface

C� Outside cutting edges

A� Hanger bracket C� Fixed position

B� Slotted adjustment D� Side locking nut

position E� Side carriage bolt

Fig. 121 g.49G015323

5� Measure between the outside cutting edges and the

level surface (Fig� 120)� If both measurements are

not within 3/16” (5mm), an adjustment is required;

continue with this procedure�

6� Support the weight of mower deck by placing wood

blocks under the edges of the deck�

Note: Avoid placing the supports under any anti-

scalp rollers if present on the deck.