Service Manual

38 ZT-2100
EXPANSION TANK
Refer to Figure 2.
Disassembly
NOTE: The following procedure should
only be done if the expansion tank has
been damaged as the transaxle can be
dissassmbled with the expansion tank
left intact.
1. Remove the expansion tank hex screw
(154).
2. Remove the expansion tank (153).
3. Remove the breather tting (156) and the
breather hose (158).
4. Remove the breather case tube (159),
breather hose (151), and o-ring (152). Dis-
card o-ring (152).
Inspection
1. Inspect the components for damage.
Assembly
1. Install the breather case tube (159) on to the
breather hose (151) and attach to tting.
2. Install the expansion tank (153) and the
expansion tank hex screw (154).
Note: Refer to Table 2 for torque
 specications.
3. Install the breather hose (158) and the
breather tting (156)
Figure 2. Expansion Tank Removal.
154
153
156
158
159
151
152