Service Manual

36 ZT-2100
Table 1. Required Tools
Miscellaneous
EZT
®
Service & Repair Manual
Flat Blade Screw Driver (2)
Torque Wrench
Air Impact Wrench
Rubber Mallet
Breaker Bar
Side Cutters/Snips
Pliers
Needle Nose
Large External Snap Ring
Small Internal Snap Ring
TOOLS AND TORQUES
Sockets
1/2”-3/8” Adapter
3/8” Deep
1/2” Deep
7/16” Deep
9/16” Deep
3/4” Deep
13/16” Deep
7/8”
T-25 Torx Head
T-40 Torx Head
Apex AN-08
Table 2. Required Torque Values
Operation Torque Item Description
Metal Plug 110-150 lb-in [12-17 Nm] 5 Plug 9/16-18
Side Housing Screws 105-155 lb-in [12-17 Nm] 7 Screw 1/4-20 x 1.25
Check Plugs 280-400 lb-in [32-45 Nm] 25 Check Plug Assembly
Center Section Bolts 525-700 lb-in [60-80 Nm] 27 Screw 3/8-24 x 2.5
Control Arm Stop Stud 125-160 lb-in [14-18 Nm] 42 Stud 5/16-24
Control Arm Screw 230-310 lb-in [26-35 Nm] 46 Screw 5/16-24 x 1
Stop Stud Nut 85-120 lb-in [10-14 Nm] 47 Nut, Lock 5/16-24 UNF
Axle Shaft Ret. Nut 55-65 lb-ft [75-88 Nm] 90 Nut, Lock
Hub Locknut 140-160 lb-ft [190-217 Nm] 99 Nut, Hex 3/4-16 Lock
Brake Assembly Screw 80-120 lb-in [9-14 Nm] 104 Screw 1/4-20 x 1
Fan/Pulley Lock Nut 540-660 lb-in [61-75 Nm] 122 PatchLock Nut 1/2 x 20
RTN Adjustment Screw 175-200 lb-in [19-22 Nm] 142 Screw 5/16-24 x 1
Breather Fitting 96-120 lb-in [10-14 Nm] 150 Fitting 9/16
Expansion Tank Screw 25-40 lb-in [3-5 Nm] 154 Screw 10-32 x 0.50