Service Manual

HYDROSTATIC DRIVE SYSTEM
5-8
Toro TimeCutter SS/MX/ZS Service Manual
5
Fig. 060 IMG-0968b
7. Remove the brake rod from the hydro:
All TimeCutter MX 50” models only – Remove the nut
(A) and the spring. Remove the brake rod from the unit
(Fig. 061).
6. Remove the brake rod from the brake actuator
module (Fig. 060). See “Brake Actuator Module” on
page 7-6.
All TimeCutter SS, ZS and MX 42” models – Remove
the nut (B), spring and washer. Remove the brake rod
from the unit (Fig. 062).
Fig. 062 PICT-1102
B
Fig. 061 PICT-1101
A