Service Manual

MOWER DECK

6-9

Toro Timecutter SS/MX/ZS Service Manual

Mower Deck Replacement

Mower Deck Removal

1. Park the unit on a level surface and disengage the

PTO switch.

2. Move the motion control levers outward to the park

position, stop engine, remove key, and wait for all

moving parts to stop before leaving the operating

position.

3. Set the height-of-cut to the lowest position.

4. Remove the retaining clip from the front support rod.

Remove the rod from the deck bracket (Fig. 099).

Carefully lower the front of the deck to the ground.

Fig. 099 g. 60 G014635

A. Front support rod C. Retaining clip

B. Locking nut

Fig. 101 PICT-1053a

Fig. 100 g. 61 G005077

5. Using the deck handles, lift the mower deck so the

hanger brackets clear the rear lift rod. Lower the

mower carefully to the ground (Fig. 100 and Fig.

101).

A. Deck C. Rear lift rod

B. Hanger brackets