Service Manual
SPECIFICATIONS
2-8
Toro TimeCutter SS/MX/ZS Service Manual
2
2013 TimeCutter MX Specications
Conguration MX4260 MX5060
23 HP 726cc Kawasaki 42” Fabricated Deck
2 - Blades
23 HP 726cc Kawasaki 50” Fabricated Deck
3 – Blades
Power Systems
Clutch Electric Electric
Transaxles Twin Hydro-Gear ZT-2200 Twin Hydro-Gear ZT-2800
Drive Belt Drive with self-tensioning system Belt Drive with self-tensioning system
Max. Ground Speed
(Fwd)
(Rev)
High 7.0 MPH
Low 4.0 MPH
3.5 MPH
High 7.0 MPH
Low 4.0 MPH
3.5 MPH
Rear Tires 18 x 7.5-8 2-ply rated 20 x 10-8 2-ply rated
Front Caster Tires 410/350 x 4 smooth tread, 2-ply rated 13 x 5.00-6 ribbed tread, 2-ply rated
Fuel Capacity 3 gallons 3 gallons
Mower Deck
Type Side Discharge Side Discharge
Deck Construction Fabricated 10 gauge steel Fabricated 10 gauge steel
Spindle Housing Die Cast Aluminum Die Cast Aluminum
Spindle Shaft/Bearings Two 17mm diameter spindles
permanently lubed ball bearings
Three 17mm diameter spindles
permanently lubed ball bearings
Tip Speed 17,810 ft/min @ 3400 RPM 18,330 ft/min @ 3400 RPM
Cutting Height 1.5” to 4.5” 7 positions 1.5” to 4.5” 7 positions
Anti-Scalp Rollers 2 Adjustable 3 Adjustable
Frame Construction Riveted 10 gauge steel Riveted 10 gauge steel
Dimensions
Weight 549 lbs. 635 lbs.
Width Outside Rear Tires 38.7 in. (98.3cm) 47.8 in. (121.4cm)
Width Outside Deck 54.0” (137.2cm) Deck deector down
45.6” (115.8cm) Deck deector up
61.7” (156.7cm) Deck deector down
53.5” (135.9cm) Deck deector up
Wheel Base 45.6” (115.8cm) 45.6” (115.8cm)
Overall Length 71.8” (182.4cm) 71.8” (182.4cm)
Height 41.5” (105.4cm) 42.4” (107.7cm)