Service Manual

MOWER DECK

6-23

Toro Timecutter SS/MX/ZS Service Manual

4. Carefully rotate the blade so that it is side-to-side

(Fig. 120).

7. Move to the left side of the machine. Remove the

side carriage bolt (E) and locking nut (D) from the

xed position (C). Install it into the rear slotted

position (B) (Fig. 121). Leave the lock nut slightly

loose.

Fig. 120 g. 48 G014630

A. Blade side-to-side D. Measure from blade tip

B. Sail area of blade to level surface

C. Outside cutting edges

A. Hanger bracket C. Fixed position

B. Slotted adjustment D. Side locking nut

position E. Side carriage bolt

Fig. 121 g. 49 G015323

5. Measure between the outside cutting edges and the

level surface (Fig. 120). If both measurements are

not within 3/16” (5mm), an adjustment is required;

continue with this procedure.

6. Support the weight of mower deck by placing wood

blocks under the edges of the deck.

Note: Avoid placing the supports under any anti-

scalp rollers if present on the deck.