Service Manual

MOWER DECK

6-35

Toro Timecutter SS/MX/ZS Service Manual

6. To adjust the front-to-rear blade slope, rotate the

adjustment nut on the front of the deck (Fig. 142).

7. To raise the front of the deck tighten the adjustment

nut. To lower the front of the deck loosen the

adjustment nut.

8. After adjustment, check the front-to-rear slope again.

Continue adjusting the nut until the front blade tip is

1/16-5/16” (1.6-7.9mm) lower than the rear blade tip

(Fig. 141).

9. When the front-to-rear blade slope is correct check

the side-to-side level of the deck again; refer to Side-

to-Side Leveling in this chapter.

Fig. 142 g. 53 G014634

A. Adjusting rod C. Lock nut

B. Adjusting block