Service Manual

MOWER DECK
6-10
Toro TimeCutter SS/MX/ZS Service Manual
6
Mower Deck Installation
1. Park the unit on a level surface and disengage the
PTO switch.
2. Move the motion control levers outward to the park
position, stop engine, remove key, and wait for all
moving parts to stop before leaving the operating
position.
3. Slide the deck under the unit.
4. Set the height-of-cut to the lowest position.
5. Lift the rear of the deck and guide the hanger
brackets onto the rear lift rod (Fig. 103).
Fig. 102 g. 62 G017643
6. Slide the deck rearward to remove the deck belt
from the engine pulley.
7. Slide the deck out from underneath the unit.
Note: Retain all parts for future installation.
A. Idler pulley E. Engine pulley
B. Deck belt F. Spring tool
C. Spindle pulley G. Deck handles
D. Spring
A
B
C
G
D F
E
C
G
Fig. 103 g. 61 G005077
A. Deck C. Rear lift rod
B. Hanger brackets
A
B
B
C