Operator's Manual
Table Of Contents
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- Adding Fuel
- Checking the Engine-oil Level
- Breaking in a New Machine
- Think Safety First
- Operating the Parking Brake
- Operating the Mower-Blade-control Switch (PTO)
- Operating the Throttle
- Operating the Ignition Switch
- Using the Fuel Shut-off Valve
- Starting and Stopping the Engine
- The Safety-interlock System
- Operating the Platform
- Driving Forward or Backward
- Stopping the Machine
- Using the Rotation Indicator
- Pushing the Machine by Hand
- Transporting the Machine
- Loading the Machine
- Side Discharging or Mulching the Grass
- Adjusting the Height-of-Cut
- Adjusting the Anti-scalp Rollers (for 60-inch models only)
- Adjusting the Flow Baffle
- Positioning the Flow Baffle
- Using the Mid-size Weight
- Raising the Mower for Access
- Releasing the Cushion for Rear Access
- Lubricating the Machine
- Greasing the Front Caster Pivots
- Lubricate Caster-wheel Hubs
- Servicing the Air Cleaner
- Servicing the Engine Oil
- Servicing the Spark Plug
- Checking the Spark Arrester (if equipped)
- Draining the Fuel Tank
- Servicing the Fuel Filter
- Servicing the Electronic Fuel-injection System
- Servicing the Battery
- Servicing the Fuses
- Jump Starting the Machine
- Adjusting the Tracking
- Checking the Tire Pressure
- Adjusting the Caster-pivot Bearing
- Servicing the Caster Wheels and Bearings
- Servicing the Clutch
- Cleaning the Air-intake Screen
- Cleaning the Cooling System
- Servicing the Engine-oil Cooler
- Cleaning the Hydraulic-oil Cooler
- Servicing the Hydraulic-oil Cooler
- Servicing the Brake
- Replacing the Mower-deck Belt
- Replacing the Pump-drive Belt
- Adjusting the Motion-control-handle Positions
- Servicing the Hydraulic System
- Mower Deck Maintenance
- Cleaning Under the Mower
- Disposing of the Waste
- NO TITLE
Figure92
1.Measurethebladeat
pointsAandB
2.Measurefromalevel
surface
4.Ifitisnotcorrect,refertoChangingtheMowerDeck
Front-to-RearPitch(page59).
ChangingtheMowerDeck
Front-to-RearPitch
Changingthefront-to-rearpitchisdonebyadjustingthe
frontheight-of-cutposts.
1.Place3piecesof2x4woodunderthemowerdeckas
shownin
Figure93.
2.Standthe2x4piecesonthe4-inchpart.
g017745
Figure93
1.2x4pieceofwoodunderthemowerdeck
3.For48and52-inchmowerdecks,loosenboththefront
andrearnutsontheadjustmentrods(Figure94).
4.For60-inchmowerdecks,loosenboththefrontand
rearnutsandliftlinksontheadjustmentrods(Figure
95).
Note:Theweightofthemowerdeckmustberesting
onall3ofthe2x4pieces(Figure94).
Note:Thebacklipofthemowerdeckisbuilt6mm
(1/4inch)lowerthanthefrontlipofthemowerdeck.
5.For60-inchmowerdecks,tightentheliftlinks(Figure
95).
6.Tightenboththefrontandrearnuts.
7.Checkthefront-to-rearpitchofthecuttingunit.
8.Ifthedimensionsarenotcorrect,adjustthefrontand
rearnutsoneithersidetogetthecorrectfront-to-rear
pitch(Figure94).
G015246
Figure94
48and52-inchmowerdecks
1.Adjustmentrods3.Frontnuts
2.Rearnuts
59