Operator's Manual

Using the Parking Brake

Always set the parking brake whenever you stop the tractor

or leave it unattended.

Setting the Parking Brake

1. Push the brake pedal (Fig. 2) down and hold it.

2. Turn the parking brake lever (Fig. 2) counterclockwise

and gradually take your foot off the brake pedal.

Note: The clutch/brake pedal should stay in the

depressed (locked) position.

Releasing the Parking Brake

1. Push down on the brake pedal (Fig. 2).

Note: The parking brake lever should release.

2. Gradually release the brake pedal.

Positioning the Seat

The seat can move forward and backward. Position the seat

where you have the best control of the tractor and are most

comfortable.

1. Raise the seat and loosen the adjustment knobs (Fig. 3).

m-4841

Figure 3

1. Adjustment knobs

2. Move the seat to the desired position and tighten the

knobs.

Using the Blade Control (PTO)

The blade control (PTO) knob engages and disengages

power to the blades.

Engaging the Blades

1. Depress the brake pedal to stop the tractor.

2. Pull the blade control (PTO) knob out to the Engaged

position (Fig. 4).

Figure 4

1. Blade control (PTO)

2. Engaged

3. Disengaged

Note: The blade control (PTO) light on the dash turns on

when you engage the blades (PTO) as shown in Figure 5.

Figure 5

1. Grass collector warning

light

2. Blade control (PTO) light

Disengaging the Blades

1. Depress the brake pedal to stop the tractor.

2. Push the blade control (PTO) knob into the Disengaged

position (Fig. 4).