Addendum

FormNo.3361-684RevA
GrandStand
™
Mowers
AllGrandStand
™
Mowers
Addendum
Ensurethetractionrollersarelubricatedatthenew
interval.KeepthisaddendumwithyourOperator’s
Manual.
LubricatingtheMachine
ServiceInterval:Every200hours/Yearly(whichever
comesrst)—Lubricatethetraction
rollers(moreoftenindirtyordusty
conditions).
Lubricatethetractionrollerswithadrylubricant
(PTFE).
Figure1
AdjustingtheSpeedControl
Lever
1.DisengagethePTO,movetherightsidemotion
controllevertotheneutralpositionandsetthe
parkingbrake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.MovetheHOClevertothe1inchheight-of-cut
position(lowestposition)(Figure2).
4.Movethespeedcontrollevertothefastposition
(Figure2).
5.Holdthemotioncontrolleversfullyforward.
Figure2
1.Motioncontrolleversfully
forward
3.HOCleverinthe1inch
height-of-cutposition
(lowestposition)
2.Speedcontrolleverinfast
position
6.Locatethecableandcableclampundertheframein
frontoftheleftwheel,asshown(Figure3).
7.Loosenthecableclampandpullthecabletowards
rearoftheunituntiltight(Figure3).
8.Tightenthecableclampbutnotsotightthatit
restrictsthetravelofthecable(Figure3).
Figure3
1.Clamp2.Cable
©2008—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved