Service Manual

CHASSIS

3-14 Toro GrandStand Service Manual

7. Place the two HOC bracket bolts through the side

of the control panel. The carriage bolt goes into the

upper hole (Fig. 0050).

Fig. 0050 DSCN-0323a

6. Secure the HOC handle assembly to the control

tower using the carriage bolt and nut (Fig. 0049).

Note: Do not over-tighten. The HOC handle assem-

bly must move freely.

Fig. 0049 DSCN-0288a

8. Place a spacer over each of the bolts (Fig. 0051).

Fig. 0051 DSCN-0325a

5. Secure the pivot hub with the “E” clip (Fig. 0048).

Fig. 0048 DSCN-0285a