Service Manual

HYDRAULIC DRIVE SYSTEM

6-67Toro GrandStand Service Manual

23. Remove the upper tting from the wheel motor. Cap

the wheel motor port so that debris does not enter

the system. (Fig. 1146).

Fig. 1146 IMG-9897a

24. Repeat steps 22 and 23 to remove the lower wheel

motor tting.

25. Remove the 2 lower carriage bolts and nuts securing

the center motor mount to the LH and RH motor

mount assemblies (Fig. 1147).

Fig. 1147 IMG-9948a

26. Remove the upper carriage bolt and nut from the

center motor mount closest to the wheel motor being

removed (Fig. 1148).

Fig. 1148 IMG-9949a

27. Loosen the remaining nut until it is ush with the end

of the carriage bolt (Fig. 1149).

Fig. 1149 IMG-9953a