Service Manual

HYDRAULIC DRIVE SYSTEM
6-44 Toro GrandStand Service Manual
6
39. Remove the hairpin cotter and washer from the rear
end of the right hand shifter link rod (Fig. 1063).
Fig. 1063 IMG-9424a
38. 2010 only: Remove the bolt, nut, washers and
spacer securing the RH shifter link to the shifter
bracket (Fig. 1062).
Fig. 1062 IMG-0905a
40. Serial range 290000001 - 290000209: Remove the
right hand shifter link rod and the 3 rollers located on
the rear end of the shifter link rod from the inside of
the control fork assembly and pump control arm (Fig.
1064).
Fig. 1064 IMG-9486a
37. 2009 only: Remove the hairpin cotter and washer
from the front end of the right hand shifter link rod
and slide the front end of the rod out of the shifter
arm (Fig. 1061).
Fig. 1061 IMG-9422a