Service Manual

HYDRAULIC DRIVE SYSTEM
6-33Toro GrandStand Service Manual
6
40. Install the operator cushion assembly to the tower.
41. Move the HOC lever to the transport level.
42. Move the platform to the up position.
43. Raise the machine to access the pump pulley.
44. Apply anti-seize compound to the left hand pump
shaft (Fig. 1022).
Fig. 1022 IMG-9460a
45. Install a key into the pump shaft keyway (Fig. 1023).
Fig. 1023 IMG-9463a
46. Apply thread locking compound to 2 pulley set
screws (Fig. 1024).
Fig. 1024 IMG-9467a