Service Manual

CONTROLS
4-7Toro GrandStand Service Manual
4
RH Motion Control Lever Installation
9. Remove the nut and washer securing the adjustment
cam to the RH control lever (Fig. 0652).
1. Install the four plastic bearings to the motion control
assembly (Fig. 0654).
Fig. 0652 IMG-0999a
10. Remove the four plastic bearings from the motion
control assembly (Fig. 0653).
Fig. 0653 IMG-1002a
Fig. 0654 IMG-1002a
2. Loosely secure the adjustment cam to the RH
control lever (Fig. 0655).
Note: This nut will be tightened later in the process.
Fig. 0655 IMG-0999a