Service Manual

CHASSIS

3-123Toro GrandStand Service Manual

117. Secure the black ground cable to the negative

terminal on the battery using the bolt, washer and

nut (Fig. 0463).

Fig. 0463 DSCN-1499a

119. Verify the mower deck is properly adjusted. See

“Mower Deck Adjustments - Correcting the Mower

Quality of Cut” on page 7-50.

120. Bleed the hydraulic system. See “Bleeding the

Hydraulic System” on page 6-95.

118. Secure the battery to the battery tray using the

battery cover, hold down bolts and wing nuts (Fig.

0464).

Fig. 0464 DSCN-1504a

Carrier Frame Replacement

Carrier Frame Removal

1. 2009 only: Remove the lift assist cylinder. See “Lift

Assist Cylinder Removal (2009 only)” on page 3-40.

2. Place two boards under the deck and lower the deck

onto them (Fig. 0465).

Note: The boards need to be long enough to sup-

port the front and rear of the deck.

Fig. 0465 DSCN-0685a

3. 2009 only: Remove the nut securing the lift bar to

the rear cross shaft assembly (Fig. 0466).

Fig. 0466 DSCN-0795a