Service Manual

ELECTRICAL
8-23Toro GrandStand Service Manual
8
Electric PTO Clutch Installation
1. Using a feeler gauge, check the clutch air gap at
each of the 3 adjustment slots. The gap should be
set to 0.015” (0.381mm). Make sure the gauge is
inserted between the armature and the rotor friction
surfaces. Adjust the clutch as necessary (Fig. 1493).
Fig. 1493 PICT-0554a
2. 2009 only: Install 2 grommets into the clutch brake
strap (Fig. 1494).
Fig. 1494 IMG-9622a
3. 2009 only: Slide 2 spacers into the 2 grommets in
the clutch brake strap (Fig. 1495).
Fig. 1495 IMG-9621a
4. 2009 only: Install a bolt and washer into the clutch
plate (Fig. 1496).
Fig. 1496 IMG-9620a