Service Manual

HYDRAULIC DRIVE SYSTEM

6-45Toro GrandStand Service Manual

41. Serial range 290000210 - 290999999: There are

3 rollers located on the rear end of the right hand

shifter link rod inside the control fork assembly and

pump control arm. Slide the left hand roller off the

rear end of the right hand shifter link rod (Fig. 1065).

Fig. 1065 IMG-9430a

43. Serial range 290000210 - 290999999: Push down

on the control fork assembly and remove the center

roller from the pump control arm slot (Fig. 1067).

Fig. 1067 IMG-9436a

42. Serial range 290000210 - 290999999: Remove the

rear end of the right hand shifter link rod and the

right hand roller (Fig. 1066).

Fig. 1066 IMG-9432a

44. 2010 only: Remove the RH shifter link and the

3 rollers located on the rear end of the shifter link

inside of the control fork assembly (Fig. 1068).

Fig. 1068 IMG-0948a