Service Manual

CONTROLS

4-16 Toro GrandStand Service Manual

5. Loosely install the large washer and nut securing

the control fork and shoulder hub assembly to the

linkage mount (Fig. 0688).

Note: This will be tightened later in this procedure.

6. 2009 Only: Serial range 290000001 – 290000209:

Slide 3 rollers onto the rear end of the RH shifter link

rod. Slide the rear end of the shifter link rod (with 3

rollers) into the control fork assembly (Fig. 0690).

Fig. 0688 IMG-1013a

Shifter Link and Roller Congurations (Fig. 0689):

A. 2009: Serial range 290000001-290000210;

3 rollers, all thin and same size

B. 2009: Serial range 290000211-290999999;

3 rollers, large center roller

C. 2010: Serial range 310000001-310999999;

3 rollers, all large and same size

Fig. 0689 IMG-0941a

Fig. 0690 IMG-9486a

7. 2009 Only: Serial range 290000210 -290999999:

Push down on the control fork assembly and slide

the center roller into the slot of the pump control arm

(Fig. 0691).

Fig. 0691 IMG-9436a