Service Manual

CHASSIS

3-80 Toro GrandStand Service Manual

36. Remove both sets of bolts, nuts, and spacers

securing the lower end of the control cables to the

control fork assemblies (Fig. 0298).

Fig. 0298 DSCN-0996a

37. Remove the spring clip securing the motion control

cables to the linkage mount (Fig. 0299).

Fig. 0299 DSCN-0999a

38. Remove the two cable ties securing the speed

control cable to the RH control cable and the lower

LH side of the linkage mount (Fig. 0300).

Fig. 0300 DSCN-1000a

39. Remove the motion control cables from the linkage

mount (Fig. 0301).

Fig. 0301 DSCN-1005a