Service Manual

CHASSIS

3-71Toro GrandStand Service Manual

Engine Base Replacement

Engine Base Removal

1. 2009 only: Remove the lift assist cylinder. See “Lift

Assist Cylinder Removal (2009 only)” on page 3-40.

2. Place two boards under the deck and lower the deck

onto them (Fig. 0263).

Note: The boards need to be long enough to sup-

port the front and rear of the deck.

Fig. 0263 DSCN-0685a

3. 2009 only: Remove the nut securing the lift bar to

the rear cross shaft assembly (Fig. 0264).

Fig. 0264 DSCN-0795a

4. 2010 only: Remove the dampener assembly that

secures the lift bar to the rear cross shaft assembly

(Fig. 0265).

Fig. 0265 DSCN-0793a

5. Remove the fuel tank. See “Fuel Tank Assembly

Removal” on page 3-26.

6. Remove the cable ties securing the high-pressure

hoses (Fig. 0266).

Fig. 0266 DSCN-0689a