Service Manual

CHASSIS

3-69Toro GrandStand Service Manual

27. Repeat steps 24 through 26 on the other side of the

machine.

28. Replace the tting o-rings. Install the high pressure

hoses to the pumps in their original positions (Fig.

0255).

Fig. 0255 DSCN-0810a

29. Secure the hose routings using three cable ties (Fig.

0256).

Fig. 0256 DSCN-0689a

30. 2009 only: Install the lift assist cylinder. See “Lift

Assist Cylinder Installation (2009 only)” on page

3-43.

31. 2010 only: Position the chain between the pivot

shaft and extension spring assembly (Fig. 0257).

Fig. 0257 DSCN-0815a

32. 2010 only: Secure the extension spring assembly

and chain to the control tower using the bolt and

washer (Fig. 0258).

Fig. 0258 DSCN-0818a